AndroOne

If we have a smartphone or tablet android Highly course we want our Android device to be directly connected to the Internet. This can be done if we are equipped Android device card slot that both GSM and CDMA at the same time the problem comes modem.Nah gmana if Device Android (Tablet) is not equipped SIM.Menggunakan card slot wifi? For the every day working in the area of ​​free wifi anyway nice .. klo baseball????? Questions arise ......? (So follow one of the contestants Standup Comedy ago)
One other way is to use USB Modem.



USB Modem detected so android

I will share how to have a USB modem that you have to work on android tablet PC.

In general, the modem is already marketed as plug and play on your PC to attach the USB modem as there are 3 devices are: Modem, Virtual CD Rom and Card Reader.

In this course has no problem when you plug the modem in your PC, due to the 3 function device will run automatically installs the software and modem drivers in your PC automatically.

While the android-based tablet PC that will not work like on PC, because In the Android-based tablet PC will only read only the modem function to connect to the internet.

Below I will give totorial how to eliminate functionality Virtual drive and card reader, so the only modem that can only be read by Android Tablet PC, so you can surf using the Android tablet PC is not equipped with an internal modem.

You memrlukan PC modem to change the default configuration so that you have to work on a Tablet PC-based Android OS.

1. Your modem plugs on a PC, make sure the modem is detected by your computer, check out the My Computer will be an additional drive.
2. Once detected you try to connect to the internet, so it can connect perfectly.
3. Disconnect your internet, turn off all programs associated with the connection.
4. Run Hyper Terminal program, you can find this program at: Start> Programs> Accessories> Communications> Hyper Terminal.
5. In the "Connection Deescription" typed brand of modem you have eg "Huawei" (which I use here of the Huawei brand modem), and then wait at the bar at the bottom to get out the words "connect"
6. On the menu bar in the "Connection Description" select "connect using" select the modem is detected eg "HUAWEI Mobile Connect - 3G Modem" and click OK
7. And will be setting out the connection with no dial and ask for input other parameters, you can cancel the process.
8. Kenmudian on the program toolbar, follow these steps: "Properties" à à properties window will open on the modem "select the tab" Settings à Click "ASCIISetup" à cecklist "Show input characters on the screen." then click OK. Close the program settings and then click "OK" when the program was closed on the main Hyper Terminal program you will get a blinking cursor
9. Turn CapsLocks there on keyboardm then typing commands, then enter, you will menrima said OK on the program, it indicates there is already able to change the default configuration of your modem.
10. Type the following command to change the configuration of your modem with the command:
AT ^ U2DIAG = 0 (device-only modem)
AT ^ U2DIAG = 1 (the device as a modem + CD-ROM)
AT ^ U2DIAG = 255 (the device as a modem + CD-ROM + Card Reader)
AT ^ U2DIAG = 256 (the device as a modem + Card Reader).
For modem settings on an Android tablet, USB modem you simply function as a modem command: AT ^ U2DIAG = 0, and then press ENTER, and you will see the status OK. à Close Hyper Terminal by selecting the "Yes"
To restore the function of the above you can start over from the beginning cara2.
Taken from one friend's blog. may be useful .....